Are you need IT Support Engineer? Free Consultant

TPM Consultants and Spare Parts: 5 Hidden Costs in Your Stores

  • By Faber Infinite
  • November 20, 2026

TPM consultants are usually brought in to reduce breakdowns, but one of the first places they look is the maintenance stores. Spare parts sit quietly on shelves, yet they affect cash, uptime and cost in ways that rarely show up clearly in reports. This guide explains five hidden costs in your spare parts stores, where each one appears in the profit and loss account, and how TPM consultants help link spares to the way equipment is actually maintained.

bottom-up leadership

In many plants, spare parts are managed separately from maintenance. Stores teams order based on past usage or requests, maintenance teams keep their own private stock to avoid waiting, and finance sees a growing inventory balance with little explanation. The result is too much of some parts and too little of others.

Why do spare parts matter in a TPM programme?

Spare parts matter in a TPM programme because they connect maintenance decisions to money. Every breakdown that waits for a part extends downtime. Every part bought too early or in too large a quantity ties up cash. Every part that is never used becomes a write-off.

Total productive maintenance aims to make equipment reliable through operator care, planned maintenance and problem-solving. As reliability improves, the pattern of spares usage changes. If stores management does not change with it, the plant either carries stock it no longer needs or misses parts it now needs for planned work.

Spare parts are part of a wider group of items known as maintenance, repair and operations supplies. Because individual items are often low in value, the total cost is easy to overlook.

Hidden cost Where it shows up in the P&L Typical sign in the stores
1. Excess stock Cash tied up in working capital, holding costs Full shelves of slow-moving items
2. Stock-outs on critical spares Lost output, overtime, missed deliveries Breakdowns extended while waiting for parts
3. Obsolete and dead stock Write-offs and wasted space Parts for machines no longer in use
4. Duplicates and poor identification Extra purchases, searching time Same part stored under different codes
5. Emergency purchasing Higher prices, freight and expediting Frequent urgent orders and local buying

Hidden cost 1: How much cash is tied up in excess spare parts?

The first hidden cost is excess stock. Many plants hold more spare parts than they need, often because past shortages led to large orders, or because each maintenance team keeps its own buffer.

Excess stock ties up cash that could be used elsewhere in the business. It sits in working capital and brings holding costs such as space, handling, insurance and the risk of damage or deterioration over time.

TPM consultants help by linking stock levels to actual maintenance needs. When planned maintenance tasks are defined for each critical machine, the parts they require and the timing become clearer, and stock can be set accordingly.

Hidden cost 2: What does a missing critical spare really cost?

The second hidden cost is the stock-out of a critical spare. When a key machine fails and the part is not available, the breakdown lasts until the part arrives. Output is lost, overtime may be needed to recover, and deliveries can slip.

These costs rarely appear against the stores budget. They show up as lost production, extra labour and sometimes customer penalties, which makes the true cost of a missing spare easy to underestimate.

TPM consultants help maintenance and stores teams identify critical spares: parts whose absence would stop an important machine for a long time. These parts are then managed with more care, with agreed minimum levels and regular checks.

Hidden cost 3: Why does obsolete stock build up?

The third hidden cost is obsolete and dead stock. Parts remain on shelves for machines that have been replaced, modified or retired. Others were bought for a one-off repair and never used again.

This stock occupies space, confuses stores staff and eventually becomes a write-off. Because nobody owns the decision to remove it, it often stays for years.

A TPM programme usually includes building an accurate asset register. Matching spares to the current list of machines quickly shows which parts no longer have a use, so they can be returned, sold, reused or written off in a planned way.

Hidden cost 4: How do duplicates and poor identification add cost?

The fourth hidden cost is duplicates and poor identification. The same part may be stored under different codes, descriptions or locations, especially when it was bought from different suppliers or for different machines.

When technicians cannot find a part quickly, they may assume it is not in stock and order another. Searching time adds to repair time, and duplicate purchases add to inventory.

Clear part codes, consistent descriptions, labelled locations and visual organisation of the stores help. These are the same principles used in workplace organisation, and a 5S visual workplace approach applies to stores as much as to the shop floor.

Hidden cost 5: Why are emergency purchases so expensive?

The fifth hidden cost is emergency purchasing. When parts are needed urgently, buyers often accept higher prices, pay for express freight or buy locally from whoever has stock. Each urgent order may seem small, but the total adds up.

Emergency purchasing is usually a symptom of the other hidden costs: stock-outs of critical spares, poor identification and limited planning. As planned maintenance improves and critical spares are managed properly, the need for urgent buying falls.

But there is a more fundamental question worth asking: are your spare parts managed for the way your machines fail today, or for the way they failed years ago?

Stores often reflect past problems. When maintenance practices change, the spares strategy needs to change with them.

How do TPM consultants help with spare parts?

TPM consultants help by connecting spares management to equipment reliability. They work with maintenance and stores to classify parts, define critical spares, set sensible stock levels and build simple routines for review.

Step What it involves
Classify spares Group parts by value and usage, for example with ABC analysis
Identify critical spares Agree which parts protect the most important machines
Link to planned maintenance Plan parts needed for scheduled tasks in advance
Clean up records Remove duplicates, fix descriptions, match parts to assets
Review regularly Check usage, stock levels and slow movers on a fixed cycle

ABC analysis is a simple starting point. It shows which parts account for most of the value and helps decide where tighter control is worth the effort.

The TPM consultants page explains how a TPM engagement can include stores and spares as part of the wider maintenance system.

Who should own spare parts decisions?

Ownership should be shared but clear. Maintenance defines which parts are needed and which are critical. Stores manages receipt, storage, issue and records. Purchasing manages suppliers and lead times. Finance tracks the value and its trend.

A short monthly review with these functions, looking at critical spares, slow-moving items and urgent purchases, keeps decisions joined up. Without it, each function optimises its own part and the hidden costs remain.

What does a well-run maintenance store look like?

A well-run maintenance store is easy to understand at a glance. Every location is labelled, every item has one code and one description, and the most frequently used parts sit closest to the issue counter. Slow-moving items are stored further back, and parts for critical machines are clearly marked.

Records match what is on the shelves. Receipts and issues are recorded when they happen, not at the end of the week, so the system can be trusted when a technician needs a part in a hurry.

The store also has simple visual signals. Minimum levels are marked on bins or shelves, so a falling stock level is obvious before it becomes a shortage. Items waiting for inspection, return or disposal have their own area, so they do not mix with usable stock.

Finally, the store is connected to maintenance planning. When a planned task is scheduled, the parts it needs are reserved in advance. This reduces last-minute searching and lets the stores team spot gaps before the task begins rather than on the day.

Frequently asked questions

What are critical spares?

Critical spares are parts whose absence would stop an important machine for a long time, usually because they have long lead times or are hard to source. They need closer management than ordinary parts.

Should maintenance teams keep their own spare parts?

Small point-of-use stocks can help, but they should be recorded and controlled. Unrecorded private stock hides true usage and leads to over-buying.

Can reducing spares stock increase breakdown risk?

It can if done without analysis. Reductions should focus on excess and obsolete items while protecting critical spares linked to important machines.

How often should spare parts be reviewed?

A monthly review of critical spares and urgent purchases, with a fuller review of slow-moving stock at least once a year, works well for many plants.

Conclusion: TPM consultants and the hidden costs in your stores

Spare parts carry hidden costs: excess stock, stock-outs of critical spares, obsolete items, duplicates and emergency purchases. Each one reaches the profit and loss account through cash, output or cost. TPM consultants help connect spares to how equipment is maintained, so the stores support reliability instead of quietly draining the business.